Nukeproof Tubeless MTB Rim Tape (10m)

Nukeproof Tubeless MTB Rim Tape (10m)

This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup.

We recommend using a tape which is 2 – 3mm wider than your inner rim width

Instructions for Use

• Remove any old tape and sealant residue
• Ensure rim is clean and dry
• Start opposite the valve hole and maintain tension as you apply tape
• Work air bubbles out as you tape the wheel (Push them out via the spoke holes)
• Apply one layer of tape with a 4″ overlap
• Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim
• Pierce a small hole and insert your valve

Features:

• Length: 10m
• Suitability: Downhill, Enduro

Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World’s Largest Online Bike Store.